936-286-4367
936-286-4367

Water Well Service FAQs for Conroe, TX

Private water well owners often have questions about pump problems, pressure changes, water quality, maintenance and what to check before purchasing or improving a property with a well.

Conroe and Montgomery County are within the Gulf Coast Aquifer region, where groundwater conditions and water quality can vary by location and depth. (Texas Water Development Board)

The questions below focus on practical issues customers commonly research when deciding whether to call a water well contractor. For an overview of available work, visit our water well services in Conroe.

Call 936-286-4367

Request a Quote.

Fill in the form to get a FREE initial quotation.

Water Well Repair, Pump & Pressure FAQs

Why did my water well suddenly stop producing waterr

A complete loss of water does not automatically mean the well has gone dry. A worn or failed submersible pump is one possible cause, but the system should also be evaluated for water-level, pressure-control, electrical and other operating problems. Testing the system before replacing equipment helps determine whether the issue is with the pump or the well itself. (Penn State Extension)

What is the difference between hydro excavation and hydrovac excavation?

Low pressure can result from several parts of the system. Pump capacity, the pressure tank, mineral buildup, filtration equipment and household water demand can all affect pressure and flow.

If pressure drops mainly when several fixtures operate at once, the system may not be able to keep pace with peak demand. The first step is evaluating the existing pump and pressure system rather than automatically installing a larger pump. (Wellowner.org)

Is hydro excavation safer than traditional digging around utilities?

Frequent starting and stopping is commonly called short cycling. Pressure-tank problems are one possible cause. A bladder tank needs the correct relationship between air and water to operate properly. Too much or too little air can cause rapid pump cycling and place additional strain on the pump motor. Pressure switches and other system conditions should also be checked before deciding what needs replacement. (Wellowner.org)

What is utility daylighting?

The symptoms can overlap, which is why diagnosis matters. Changing pressure or rapid cycling may point toward the pressure tank, while declining pump output can create similar complaints.

A waterlogged bladder tank is one specific problem that can lead to repeated pump starts. Evaluating tank pre-charge, pressure-switch operation, pump performance and water flow helps narrow down the actual cause before parts are replaced. (Wellowner.org)

What is utility potholing?

Sometimes. Well rehabilitation may restore flow when reduced production is caused by sediment, mineral deposits, biofouling or clogged screen openings.

The decision depends on well construction, casing condition, static water level and what is restricting production. Testing may include water-level measurements, pumping tests and, in some situations, a downhole camera inspection. Rehabilitation is not appropriate for every deteriorated well, so evaluation should come before deciding between cleaning, rehabilitation and replacement. (Wellowner.org)

Well Maintenance & Water Quality FAQs

How often should a private water well be inspected?

The National Ground Water Association recommends a professional well inspection once each year. A checkup may include system flow, visible well components, pump performance, electrical conditions, pressure equipment and water quality.

Well owners should also pay attention between inspections to changes in pressure, taste, odor, appearance or wellhead condition instead of waiting for the next scheduled check. (Wellowner.org)

How often should I test my well water?

EPA recommends testing private well water annually for total coliform bacteria, nitrates, total dissolved solids and pH, with additional testing when local conditions or specific concerns justify it.

Testing should also be considered when the water changes in taste, smell or appearance, after significant changes around the well, or after parts of the well system have been repaired or replaced. (US EPA)

Should I test my well after heavy rain or flooding?

If floodwater reaches or affects a private well, water quality should be treated as a concern. EPA recommends additional testing after flooding or other significant changes near the well.

CDC guidance for a well affected by an emergency includes disinfection followed by water testing after the chlorine has been flushed from the system. Until testing confirms the water is suitable, follow applicable public-health guidance for drinking-water use. (US EPA)

Why does my well water smell like rotten eggs?

A sulfur or rotten-egg odor is often associated with hydrogen sulfide or bacterial activity, but the source is not always the well itself. Odors can originate in groundwater, plumbing, drains or a water heater.

Checking whether the odor occurs in hot water, cold water, one fixture or throughout the property can help narrow down its source. Water testing is preferable to choosing treatment equipment based on odor alone. (FACS of Life)

Why am I seeing sand or sediment in my well water?

Sediment can be associated with changes in the well, deposits within the system or material entering through the producing portions of the well. Silt, clay, mineral deposits and biological buildup can also reduce well performance.

A useful evaluation considers both water quality and production. Flow rate, drawdown, pump condition and well construction can help determine whether cleaning, filtration, rehabilitation or another repair approach makes sense. (Wellowner.org)

Well Drilling, Property & Contractor FAQs

Can I drill a private or irrigation well if my property already has community water?

Texas does not have a statewide rule that automatically prohibits drilling a private well simply because a property is connected to a community water system. However, private and public water systems cannot be cross-connected, and local ordinances, utility requirements or homeowner-association restrictions may apply.

Property owners should verify local requirements before committing to a drilling project. (Texas Water Development Board)

What should I check before buying a Conroe-area property with a private well?

Ask for the State of Texas Water Well Report or well log, available maintenance records and recent water-test results if they exist. A well inspection can also help identify the condition of the pump, pressure system, casing, wellhead and other components.

TWDB specifically recommends that prospective buyers obtain the well report when evaluating property served by a private well. (Texas Water Development Board)

What information is contained in a water well log?

A well log or construction report can contain the well depth, drilling method, casing and screen information, geologic formations, static water level, pumping water level, drawdown and production information.

Those records can be useful years later when troubleshooting reduced flow, planning pump work or evaluating whether rehabilitation is practical. Well owners should keep copies of these records along with maintenance and water-testing information. (Wellowner.org)

What should I verify before hiring a water well driller or pump installer in Texas?

Verify that the contractor is appropriately licensed for the work being performed. Texas requires a license to drill a water-related well and to install a pump for a water-related well.

TDLR provides a license-search system as well as technical guidance and regulations covering well drilling and pump installation. A website should not be relied on as proof of licensing when the credential can be checked directly with the state. (Texas Licensing and Regulation)

What should I do with an old or unused water well on my property?

Do not simply leave an unused well open or cover it loosely. TDLR states that the landowner of record is responsible for plugging an abandoned or deteriorated well or bringing it into compliance.

Texas also has specific plugging and reporting requirements. A landowner may hire an appropriately licensed driller or pump installer to perform the work. (Texas Licensing and Regulation)

Have Another Water Well Question?

If you are dealing with low pressure, loss of water, pump problems, unusual water quality or an older well that needs evaluation, contact Conroe Water Well Service with the details of your property and what you are experiencing. For planned drilling, inspections, pump work or other water well service in the Conroe area, submit your project information to request an estimate or discuss the type of service that may be appropriate.

936-286-4367